-
Dripper Line for Drip Irrigation Kits
1/2" Dripper Line (.52 ID) with 12" spacing of built-in emitters in a 100' roll. May be used to customize the Irri-Gator Landscape-400 Kit. Clog resistant. -
Drip Irrigation Emitter (100 Pack)
The .5 GPH Emitter (Pressure Compensating) delivers a consistent output of water, even with changes in pressure due to long runs of drip tubing or elevation changes. These emitters are self-flushing and less likely to clog than non-pressure compensating drippers. A removable top makes cleaning them simple. -
Drip Irrigation Barb Plugs
Barb Plugs - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line. Pack of 100 Barb Plugs. -
This compost is specially formulated to be an all natural, 100% organic fertilizer. LDK & Sons, LLC keeps your family in mind by keeping their products sustainable and safe to use without any worries! This can be used in gardens or containers. Directions for use: Gardens: Spread a uniform layer up to 2 inches on top of the soil, then mix in for best results. Containers: Mix 1 part compost with 2 parts of your favorite potting soil mix. -
Water your garden with the touch of a button. Adjustable water flow rate. Comes in 4 colors - Blue, red, black and green. If you have a preference, add a note to your order and we will do our best to accommodate you. -
The Irrigator Hand Nozzle with 8 Spray Patterns with comfortable rubber grip- Shower
- Flat
- Jet
- Mist
- Cone
- Soaker
- Center
- Angle
-
This hand-held watering nozzle's design allows adjustment to the exact pattern of your lawn; ensuring the landscape is precisely watered with minimal overspray waste. 8 Spray patterns:- Shower
- Mist
- Soaker
- Angle
- Center
- Flat
- Cone
- Jet
-
This is a telescoping Gutter Cleaner that expands up to 5 feet. Spray away leaves and dirt easily. Easy On/Off Switch Comfortable Grip Handle Adjustable hook for easy cleaning and storage. Aluminum tubes and fittings. -
Are you looking for a mesh filter to prevent debris from passing into your 3/4″ water hose line?
The Irritec Mesh Screen Filter is an excellent choice. Irritec outfits these 3/4-Inch Hose Thread T-Filters with a 150-mesh stainless-steel screen. One side of the filter has a female hose swivel and the other has a male hose thread. Irritec T-Filters are excellent for connecting tubing to pumps, filters, or other irrigation projects. These filters fit onto any hose bib or garden hose end. Use them wherever your system requires a 90-degree turn in the head assembly components. Unfiltered water enters the T from the female side, passes through the internal filter, and exits through the exit point on the side of the filter. Irritec designs all its irrigation supplies with quality and versatility in mind. These handy T-filters make it easier than ever to customize your irrigation setup to fit your unique needs! -
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Bronze irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Bronze sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Bronze sprinklers have been popular for irrigation systems due to several advantages they offer:- Durability: Bronze is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that bronze sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Bronze is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Bronze has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes bronze sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Bronze sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Brass irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Brass sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Brass sprinklers have been popular for irrigation systems due to several advantages they offer:- Durability: Brass is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that brass sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Brass is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Brass has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes brass sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Brass sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Signature 1973 Whiz Head Rotary Sprinkler is ideal for riser installations in planting areas. It has a 1⁄2″ (1,27 cm) female threaded inlet. These sprinklers are made of high-impact corrosion-resistant plastic. Stainless steel bearing and large orifice nozzle. Made in the USA. -
3/4″ Venturi Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4″ MHT x 3/4″ FHT to enable easy connection to a 3/4″ garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer -
2 Inch Plastic Filter with Flush Valve - Economy
- Filtering Element - 155 mesh stainless steel screen
- Constructed from chemical resistant polypropylene reinforced with fiber glass
- Pre-molded pressure taps
- Threaded cover closure - easy to use / no tools required
- Includes flush valve
-
Landscape Drip Irrigation Kit
The “Irri-Gator Landscape” Micro Irrigation Kit is designed to meet your needs and includes all the essential micro components needed to install a drip irrigation system for your landscape area. The “Irri-Gator Landscape” Micro Irrigation System is comprised of two 100’ rolls of 1/2” micro tubing, one 100’ roll of 1/4” distribution tubing and one 100’ roll of 1/4” dripper tubing. The following fittings are also included in the kit: insert tees, elbows, couplers, in-line valves and enclosures. Also included are a filter, emitters, a punch tool and all other necessary connectors to complete the system. -
Coupling for Drip Irrigation Kits
3/4" Threaded Coupling is used to connect two fittings each with MPT (Male Pipe Thread). Used in our Irri-Gator Landscape-400 Kit. -
Distribution Tubing for Drip Irrigation Kits
1/4" Distribution Tubing (no orifices) is most often branched off 1/2" dripper line or 1/2" supply tubing to individual plants with a drip emitter at the end. This tubing with no orifices may also be used as the mainline in smaller projects such as hanging baskets or small flower pot projects on decks and patios. -
Drip Irrigation Dripper Line
1/4" Dripper Line with 12" spacing of built-in emitters in a 100' roll. May be used to customize the Irri-Gator Landscape-400 Kit. This dripper line may be used in the following applications: Dense Plantings, Large Pots, Shrubs and Trees, and Gardens. -
Drip Irrigation Kit Tubing
1/2" Rigid Supply Tubing (no orifices) in a roll for Irri-Gator Landscape-400 Kit. Supply tubing allows you to get water to the desired locations in a conservative manner. You may use 1/2" insert fittings to extend the length of tubing (insert coupler), make a 90 degree angle (insert elbow) or add a row (insert tee) to your system. A punch tool may be used to insert an emitter in the supply tubing at the exact location of a planting. The 1/4" dripper line or 1/2" dripper line with 12" spacing may also be spurred from this supply tubing using 1/4" barbed fittings or 1/2" insert fittings, respectively. -
Drip Irrigation System
Once a garden exceeds 1,000 feet, gardeners are challenged to find a system that provides widespread irrigation while still being affordable. At only $311.33, the Gator 2000 drip irrigation kit can bring a steady flow of water to up to 20 rows of plants and soil reaching 100 feet in length each. For beginning to expert gardeners, our irrigation system has everything that you need to create the perfect garden getaway. We know that your garden is important to you, which means that it is important to us! -
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage. -
Drip Irrigation Fitting
1/2" Insert In-Line Valve (.620" OD) allows you to control water flow of individual lines. The valve connects sections of 1/2" Supply Tubing or 1/2" Dripper Line. A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row. Requires NO glue or tools for installation. -
Pressure Gauge Kit for Drip Irrigation Kit
If you would like to test the pressure of an individual line in your drip irrigation system, simply install this kit directly in the specific row or header of your choice. The pressure gauge included is a 0-100 psi Glycerin Liquid-Filled Gauge. This kit is compatible with our Irri-Gator Drip Irrigation Garden Kits. -
Sale!
Drip Irrigation Timer
Digital timer ideal for watering lawns, gardens, shrub areas, pots, hanging plants, patio irrigation and roof gardening. Galcon Timer Features:- 3/4" FHT inlet and MHT outlet
- 6 buttons with large integrated liquid crystal display
- Easy to read AM/PM clock and program
- Watering duration from 1 minute to 12 hours, in 1 minute increments
- Controller allows for weekly programs
- Starting times can be up to four times a day
- Powered by one 9-volt alkaline battery (not included)
-
Pressure Regulator for Drip Irrigation
Pressure Regulator 30 PSI is a preset pressure regulator with 3/4" FPT (female pipe thread) x 3/4" MPT (male pipe thread). Made in the USA.
