Shop

  • Drip Irrigation Filter

    3/4" Filter with Flush Cap and Stainless Steel 150 Mesh Screen.  This filter is 3/4" MPT (Male Pipe Thread) at both inlet and outlet sides.
  • This hand-held watering nozzle's design allows adjustment to the exact pattern of your lawn; ensuring the landscape is precisely watered with minimal overspray waste. 8 Spray patterns:
    • Shower
    • Mist
    • Soaker
    • Angle
    • Center
    • Flat
    • Cone
    • Jet
    Comes in three colors - blue, green, and black. If you have a preference, add a note to your order and we will do our best to accommodate you.
  • Pressure Regulator for Drip Irrigation

    Pressure Regulator 30 PSI is a preset pressure regulator with 3/4" FPT (female pipe thread) x 3/4" MPT (male pipe thread).  Made in the USA.
  • Are you looking for a mesh filter to prevent debris from passing into your 3/4″ water hose line?

    The Irritec Mesh Screen Filter is an excellent choice. Irritec outfits these 3/4-Inch Hose Thread T-Filters with a 150-mesh stainless-steel screen. One side of the filter has a female hose swivel and the other has a male hose thread. Irritec T-Filters are excellent for connecting tubing to pumps, filters, or other irrigation projects. These filters fit onto any hose bib or garden hose end. Use them wherever your system requires a 90-degree turn in the head assembly components. Unfiltered water enters the T from the female side, passes through the internal filter, and exits through the exit point on the side of the filter. Irritec designs all its irrigation supplies with quality and versatility in mind. These handy T-filters make it easier than ever to customize your irrigation setup to fit your unique needs!
  • Distribution Tubing for Drip Irrigation

    Distribution tubing is also referred to as blank drip tubing. It does not have built-in emitters. To be used to bring water to the garden or for the mainline to avoid any unnecessary water usage. This 5/8" distribution tubing may be added to our Irri-Gator Drip Irrigation Garden Kits. All of our perma-loc fittings will work with this tubing.
  • Gator Drip Irrigation Kits

    The Gator Fitting Pack consist of 2 Perma-Loc Tees, 1 Perma-Loc Elbow and 1 Perma-Loc Coupling. This pack allows customization of each Irri-Gator Drip Kit. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install tape-loc side, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
  • This compost is specially formulated to be an all natural, 100% organic fertilizer. LDK & Sons, LLC keeps your family in mind by keeping their products sustainable and safe to use without any worries! This can be used in gardens or containers. Directions for use: Gardens: Spread a uniform layer up to 2 inches on top of the soil, then mix in for best results. Containers: Mix 1 part compost with 2 parts of your favorite potting soil mix.
  • Hose-End Tee Filter for Drip Irrigation Kits

    Recommended to filter out particles common in well water that might clog the built-in emitters in drip tubing. This filter has a swivel FHT (female hose thread) inlet and MHT (male hose thread) outlet. The internal mesh screen filter may be removed for cleaning. When using with a drip irrigation garden kit, install this filter between your water source and the regulator/screen assembly included in each drip kit.
  • Regulator / Tee Screen Assembly for Drip Irrigation

    Regulator / Tee Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. This pressure regulator has a maximum operating pressure of 15 PSI. Requires NO glue or tools for installation. To install tape-loc sides, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
  • The Irrigator Hand Nozzle with 8 Spray Patterns with comfortable rubber grip
    • Shower
    • Flat
    • Jet
    • Mist
    • Cone
    • Soaker
    • Center
    • Angle
       
  • Signature 1973 Whiz Head Rotary Sprinkler is ideal for riser installations in planting areas.  It has a 1⁄2″ (1,27 cm) female threaded inlet.  These sprinklers are made of high-impact corrosion-resistant plastic.  Stainless steel bearing and large orifice nozzle.  Made in the USA.
  • Gilmour Metal Y Connector w/ Shut Off Valves is a great way to control water flow for two hoses.  Longer legs prevents hose kinks at faucet.  Chrome-plated zinc construction.
  • Drip Irrigation Assembly

    Regulator / Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Requires NO glue or tools for installation. To install tape-loc side, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
  • Drip Irrigation Barb Plugs

    Barb Plugs - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line.  Pack of 100 Barb Plugs.
  • Drip Irrigation Parts and Supplies

    3/4" Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4" male hose threads (MHT).
  • Drip Irrigation Parts and Supplies

    A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices.  It comes with a 3/4" FHT inlet and a 3/4" MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal.
  • Water your garden with the touch of a button. Adjustable water flow rate. Comes in 4 colors - Blue, red, black and green. If you have a preference, add a note to your order and we will do our best to accommodate you.
  • Drip Irrigation Parts and Supplies

    1" Insert x 3/4" MPT Adapter is used to couple a 1" hose to a 3/4" FPT (female pipe thread) fitting.  A 1" clamp is recommended at the hose side.
  • Drip Irrigation Fitting

    1" Insert Tee allows you to branch off an additional 1" line from the mainline or for an individual row. 1" Clamps required (not included).  Included in our Gator 2000 Drip Irrigation Kit.
  • Drip Irrigation Fitting

    1" Insert Elbow allows you to make a 90° turn in 1" tubing (ID). 1" Clamps required (not included). May be used with our Gator 2000 Drip Irrigation Kit.
  • Drip Irrigation Fitting

    1" Insert Plug, which is a 1" insert poly fitting, allows you to end a piece of 1" tubing (ID).  A 1" clamp is required (not included) to secure the fitting to the tubing in case pressure is applied.
  • U shaped wire hold downs are great for securing poly tubing, dripper line or drip tubing in place. Simple to use and work well in heavy soils. 6" long.  10 Pack.
  • Drip Irrigation Parts and Supplies

    Perma-Loc Tee fitting to be used with any Irri-Gator Drip Tubing or Distribution Tubing. A tee can be used to branch off an additional line from the mainline or for an individual row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
  • Drip Irrigation Parts and Supplies

    Perma-Loc x 250 Barb / Valve for 5/8" ID Tubing, aka In-Line Barbed Valve for 5/8" ID tubing, is used to control water flow. A valve can be easily installed into the rigid poly mainline to control the water flow of an individual row.   This barbed valve is the 250 Series.  A punch tool is required for installation.  Consists of commercial grade, UV resistant plastic. The perfect accessory for our Gator 2000 Drip Irrigation Garden Kit!!
  • Drip Irrigation Parts and Supplies

    In-Line valve for 5/8" ID tubing used to control water flow of individual lines. A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. The perfect accessory for our drip irrigation garden kits!!
Go to Top