Call Us Today! 517-458-9741|info@irrigationsupplyparts.com
FacebookYouTubeEmail

Drip Irrigation

  •

    2″ Plastic Filter – Economy

    $51.30

    2 Inch Plastic Filter with Flush Valve - Economy

    • Filtering Element - 155 mesh stainless steel screen
    • Constructed from chemical resistant polypropylene reinforced with fiber glass
    • Pre-molded pressure taps
    • Threaded cover closure - easy to use / no tools required
    • Includes flush valve
    Brand Name: Irritec
    Add to cart Details

  • Perma-Loc x 250 Barb / Valve for 5/8″ ID Tubing

    $2.16

    Drip Irrigation Parts and Supplies

    Perma-Loc x 250 Barb / Valve for 5/8" ID Tubing, aka In-Line Barbed Valve for 5/8" ID tubing, is used to control water flow. A valve can be easily installed into the rigid poly mainline to control the water flow of an individual row.   This barbed valve is the 250 Series.  A punch tool is required for installation.  Consists of commercial grade, UV resistant plastic. The perfect accessory for our Gator 2000 Drip Irrigation Garden Kit!!
    Add to cart Details

  • Barb Plugs (Dual End .075″ to .225″) – 100 Pack

    $7.00

    Drip Irrigation Barb Plugs

    Barb Plugs - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line.  Pack of 100 Barb Plugs.
    Add to cart Details

  • 1/2″ Insert x 3/4″ MPT Adapter

    $0.56

    Drip Irrigation Adapter

    1/2" Insert x 3/4" MPT (Male Pipe Thread) Adapter is used to couple a 1/2" hose to a 3/4" FPT (female pipe thread) fitting.  Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1/2" opening and a 3/4" opening.
    Add to cart Details

  • 1/2″ Insert Tee

    $0.45

    Drip Irrigation Barb Poly Fitting

    1/2" Insert Tee (.620" OD), which is a 1/2" barb x 1/2" barb x 1/2" barb poly fitting, allows you to branch off an additional 1/2″ line from the mainline or for an individual row.  Due to the style and size of the tubing as, a clamp is not typically required.  These fittings and tubing are for low pressure drip systems.
    Add to cart Details

  • 1/2″ Insert Elbow

    $0.45

    Drip Irrigation Barb Poly Fitting

    1/2" Insert Elbow (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to make a 90 degree turn while joining together two pieces of 1/2" Supply Tubing or 1/2" Dripper Line.  Due to the style and size of the tubing as, a clamp is not typically required. Used with Drip Irrigation Landscape Kit.
    Add to cart Details

  • 1/2″ Insert Coupler

    $0.36

    Drip Irrigation Fitting

    1/2" Insert Coupler (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to join two together pieces of 1/2" Supply Tubing or 1/2" Dripper Line.  Due to the style and size of the tubing as, a clamp is not typically required.  These fittings and tubing are for low pressure drip systems.
    Add to cart Details

  • Perma-Loc In-Line Valve for 5/8″ ID Tubing

    $2.16

    Drip Irrigation Parts and Supplies

    In-Line valve for 5/8" ID tubing used to control water flow of individual lines. A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. The perfect accessory for our drip irrigation garden kits!!
    Add to cart Details

  • 3/4″ Threaded Coupling (FIPT)

    $1.29

    Coupling for Drip Irrigation Kits

    3/4" Threaded Coupling is used to connect two fittings each with MPT (Male Pipe Thread). Used in our Irri-Gator Landscape-400 Kit.
    Add to cart Details

  • 1″ Insert x 3/4″ MPT Adapter

    $3.20

    Drip Irrigation Parts and Supplies

    1" Insert x 3/4" MPT Adapter is used to couple a 1" hose to a 3/4" FPT (female pipe thread) fitting.  A 1" clamp is recommended at the hose side.
    Add to cart Details

  • Figure Eight End Closure (Hose O.D. up to .660″)

    $0.20

    Drip Irrigation Figure Eight End Closure

    Figure Eight End Closure for hose O.D. (outside diameter) up to .660".  This fitting is the most common way to end a 1/2" supply line.  Used in our Irri-Gator Landscape-400 Kit.
    Add to cart Details

  • Backflow Preventer (3/4″ FHT Inlet x 3/4″ MHT Outlet)

    $1.92

    Drip Irrigation Parts and Supplies

    A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices.  It comes with a 3/4" FHT inlet and a 3/4" MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal.
    Add to cart Details

  • Hose Swivel (3/4″ FHT x 3/4″ FPT)

    $5.56

    Drip Irrigation Parts and Supplies

    3/4" Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4" male hose threads (MHT).
    Add to cart Details

  • Perma-Loc Elbow for 5/8″ ID Tubing

    $2.04

    Drip Irrigation Parts and Supplies

    Elbow fitting to be used with any Irri-Gator Drip Tubing or Distribution Tubing. Elbows allow you to make a sharp turn which the tubing itself is not capable of making. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Gator 100/250/1000 Installation Instructions
    Add to cart Details

  • ¾” Hose-End Tee Filter (Swivel FHT x MHT)

    $8.94

    Hose-End Tee Filter for Drip Irrigation Kits

    Recommended to filter out particles common in well water that might clog the built-in emitters in drip tubing. This filter has a swivel FHT (female hose thread) inlet and MHT (male hose thread) outlet. The internal mesh screen filter may be removed for cleaning. When using with a drip irrigation garden kit, install this filter between your water source and the regulator/screen assembly included in each drip kit.
    Add to cart Details

  • 3/4″ Filter with Flush Cap (MPT x MPT)

    $10.20

    Drip Irrigation Filter

    3/4" Filter with Flush Cap and Stainless Steel 150 Mesh Screen.  This filter is 3/4" MPT (Male Pipe Thread) at both inlet and outlet sides.
    Add to cart Details

  • 1/4″ Barb Connector

    $0.15

    Barb Connector for Drip Irrigation Kits

    1/4" Barb Connector to be used with drip irrigation to either connect 1/4" drip tubing or 1/4" distribution tubing to 1/2" supply tubing or to extend the length of 1/4" tubing by acting as a coupling. Use a 1/4" punch tool to make the proper size hole in the supply tubing.  This irrigation method works great in landscaping, hanging baskets, flower pots and garden boxes!
    Add to cart Details

  • 1/4″ Distribution Tubing-100′ Roll

    $10.50

    Distribution Tubing for Drip Irrigation Kits

    1/4" Distribution Tubing (no orifices) is most often branched off 1/2" dripper line or 1/2" supply tubing to individual plants with a drip emitter at the end. This tubing with no orifices may also be used as the mainline in smaller projects such as hanging baskets or small flower pot projects on decks and patios.
    Add to cart Details

  • 1/4″ Barb Tee

    $0.17

    Barb Tees for Drip Irrigation Kits

    1/4" Barb Tee to be used with drip irrigation to either connect 1/4" drip tubing or 1/4" distribution tubing to branch off another line. It can also be inserted in 1/2" supply tubing. Use a 1/4" punch tool to make the proper size hole in the supply tubing.
    Add to cart Details

  • 1/4″ Dripper Line (100′ Roll with 12″ Spacing)

    $22.25

    Drip Irrigation Dripper Line

    1/4" Dripper Line with 12" spacing of built-in emitters in a 100' roll. May be used to customize the Irri-Gator Landscape-400 Kit. This dripper line may be used in the following applications:  Dense Plantings, Large Pots, Shrubs and Trees, and Gardens.
    Add to cart Details

  • Barb Plug (Dual End from .075″ to .225″)

    $0.07

    Drip Irrigation Barb Plug

    1/4" Barb Plug - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line.
    Add to cart Details

  • Pressure Regulator 30 PSI (3/4″ FPT x MPT)

    $10.00

    Pressure Regulator for Drip Irrigation

    Pressure Regulator 30 PSI is a preset pressure regulator with 3/4" FPT (female pipe thread) x 3/4" MPT (male pipe thread).  Made in the USA.
    Add to cart Details

  • Regulator / Screen Assembly

    $7.10

    Drip Irrigation Assembly

    Regulator / Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Requires NO glue or tools for installation. To install tape-loc side, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
    Add to cart Details

  • Distribution Tubing (50′ Roll)

    $9.44

    Distribution Tubing for Drip Irrigation

    Distribution tubing is also referred to as blank drip tubing. It does not have built-in emitters. To be used to bring water to the garden or for the mainline to avoid any unnecessary water usage. This 5/8" distribution tubing may be added to our Irri-Gator Drip Irrigation Garden Kits. All of our perma-loc fittings will work with this tubing.
    Add to cart Details

  • Regulator / Tee Screen Assembly

    $8.02

    Regulator / Tee Screen Assembly for Drip Irrigation

    Regulator / Tee Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. This pressure regulator has a maximum operating pressure of 15 PSI. Requires NO glue or tools for installation. To install tape-loc sides, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit.
    Add to cart Details

Title

Go to Top