Shop

  • Drip Irrigation Fitting

    1" Insert Coupling allows you to join two pieces of 1" tubing (ID). 1" Clamps required (not included). May be used with our Gator 2000 Drip Irrigation Kit.
  • Preset Pressure Regulator for Drip Irrigation Systems

    The preset pressure regulator offers exceptional outlet pressure control to provide consistent performance from 1/2 to 12 gallons per minute.  Both inlet and outlet are 3/4" FIPT.  Included in our Gator 2000 Drip Kit due to extra thick industrial strength side walls.  Made in the USA.
  • Barb Connector for Drip Irrigation Kits

    1/4" Barb Connector to be used with drip irrigation to either connect 1/4" drip tubing or 1/4" distribution tubing to 1/2" supply tubing or to extend the length of 1/4" tubing by acting as a coupling. Use a 1/4" punch tool to make the proper size hole in the supply tubing.  This irrigation method works great in landscaping, hanging baskets, flower pots and garden boxes!
  • Drip Irrigation Garden System

    For flower beds smaller than 200 square feet, the Gator 100 irrigation kit is a great way to keep soil moist without using excess water. At a cost of only $59.85, the Gator 100 can bring irrigation to flower beds with as many as four separate rows spanning 22’ in length. Each row can be separated from the next by as much as four feet for the Gator 100 to be effective. To create your own small, personal slice of heaven right in your backyard, look no further than the Gator 100. Our irrigation systems will make your life easier and your plants healthier. Get yours today!
  • Drip Irrigation Fitting

    1/2" Insert Coupler (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to join two together pieces of 1/2" Supply Tubing or 1/2" Dripper Line.  Due to the style and size of the tubing as, a clamp is not typically required.  These fittings and tubing are for low pressure drip systems.
  • Drip Irrigation Filter

    3/4" Filter with Flush Cap and Stainless Steel 150 Mesh Screen.  This filter is 3/4" MPT (Male Pipe Thread) at both inlet and outlet sides.
  • Hose-End Tee Filter for Drip Irrigation Kits

    Recommended to filter out particles common in well water that might clog the built-in emitters in drip tubing. This filter has a swivel FHT (female hose thread) inlet and MHT (male hose thread) outlet. The internal mesh screen filter may be removed for cleaning. When using with a drip irrigation garden kit, install this filter between your water source and the regulator/screen assembly included in each drip kit.
  • Drip Irrigation Barb Poly Fitting

    1/2" Insert Tee (.620" OD), which is a 1/2" barb x 1/2" barb x 1/2" barb poly fitting, allows you to branch off an additional 1/2″ line from the mainline or for an individual row.  Due to the style and size of the tubing as, a clamp is not typically required.  These fittings and tubing are for low pressure drip systems.
  • Drip Irrigation Barb Poly Fitting

    1/2" Insert Elbow (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to make a 90 degree turn while joining together two pieces of 1/2" Supply Tubing or 1/2" Dripper Line.  Due to the style and size of the tubing as, a clamp is not typically required. Used with Drip Irrigation Landscape Kit.
  • Drip Irrigation Barb Plug

    1/4" Barb Plug - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line.
  • Drip Irrigation Fitting

    1" Insert Elbow allows you to make a 90° turn in 1" tubing (ID). 1" Clamps required (not included). May be used with our Gator 2000 Drip Irrigation Kit.
  • Punch Tool for Drip Irrigation Kits

    Ejector Style Hole Punch used for "punching" a hole in rigid poly tubing to insert 1/4" barb fittings. This punch is constructed of heavy duty plastic. It creates clean, precise holes for 1/4" barb fittings. Ejector pin quickly cleans the punch tool of debris. Included in our Gator 2000 Drip Kit as well as our Landscape 400 Drip Kit.
  • Drip Irrigation Adapter

    1/2" Insert x 3/4" MPT (Male Pipe Thread) Adapter is used to couple a 1/2" hose to a 3/4" FPT (female pipe thread) fitting.  Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1/2" opening and a 3/4" opening.
  • Drip Irrigation Fitting

    1" Insert Tee allows you to branch off an additional 1" line from the mainline or for an individual row. 1" Clamps required (not included).  Included in our Gator 2000 Drip Irrigation Kit.
  • Punch-N-Cut Tool not only cuts rigid poly tubing, but also makes punching holes and inserting 1/4" barbed fittings & emitters almost effortless. All-In-One!  It is a favorite among landscapers and commercial growers. This lightweight all-in-one tool is a great alternative to those frustrating days of keeping track of multiple tools! Punch N' Cut Tool has three major uses:
    • Cutting Tool - Cuts up to .94" mainline tubing with ease.  Also cuts up to 1" PVC Schedule 40 with a little more effort required.
    • PunchTool - Punches holes in 1/2" or larger mainline tubing for 1/4" fittings or emitters to be inserted.
    • Insert Tool - Holds a barbed fitting and certain emitters to make installation easier. Less work for your fingers.
  • Groundskeeper II Rake

    $24.95$76.00

    Gardening Supplies

    Groundskeeper II Rake is available in two sizes: The "Gardener" Rake has a 6" head with 8 steel tines and an 18" fiberglass handle weighing less than 2 pounds. The "Full Size" Rake has a 21" head with 28 steel tines and a 55" fiberglass handle weighing only 2 pounds.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Pressure Regulator for Drip Irrigation

    Pressure Regulator 30 PSI is a preset pressure regulator with 3/4" FPT (female pipe thread) x 3/4" MPT (male pipe thread).  Made in the USA.
  • Sale!

    3/4″ Hose End Irrigation Timer-LCD Display

    Original price was: $104.88.Current price is: $89.15.

    Drip Irrigation Timer

    Digital timer ideal for watering lawns, gardens, shrub areas, pots, hanging plants, patio irrigation and roof gardening. Galcon Timer Features:
    • 3/4" FHT inlet and MHT outlet
    • 6 buttons with large integrated liquid crystal display
    • Easy to read AM/PM clock and program
    • Watering duration from 1 minute to 12 hours, in 1 minute increments
    • Controller allows for weekly programs
    • Starting times can be up to four times a day
    • Powered by one 9-volt alkaline battery (not included)
  • Pressure Gauge Kit for Drip Irrigation Kit

    If you would like to test the pressure of an individual line in your drip irrigation system, simply install this kit directly in the specific row or header of your choice.  The pressure gauge included is a 0-100 psi Glycerin Liquid-Filled Gauge.  This kit is compatible with our Irri-Gator Drip Irrigation Garden Kits.
  • Drip Irrigation Fitting

    1/2" Insert In-Line Valve (.620" OD) allows you to control water flow of individual lines.  The valve connects sections of 1/2" Supply Tubing or 1/2" Dripper Line.  A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row.  Requires NO glue or tools for installation.
  • Poly Tubing for Drip Irrigation Systems

    Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
  • Drip Irrigation System

    Once a garden exceeds 1,000 feet, gardeners are challenged to find a system that provides widespread irrigation while still being affordable. At only $311.33, the Gator 2000 drip irrigation kit can bring a steady flow of water to up to 20 rows of plants and soil reaching 100 feet in length each. For beginning to expert gardeners, our irrigation system has everything that you need to create the perfect garden getaway. We know that your garden is important to you, which means that it is important to us!
  • Drip Irrigation Kit Tubing

    1/2" Rigid Supply Tubing (no orifices) in a  roll for Irri-Gator Landscape-400 Kit. Supply tubing allows you to get water to the desired locations in a conservative manner. You may use 1/2" insert fittings to extend the length of tubing (insert coupler), make a 90 degree angle (insert elbow) or add a row (insert tee) to your system. A punch tool may be used to insert an emitter in the supply tubing at the exact location of a planting. The 1/4" dripper line or 1/2" dripper line with 12" spacing may also be spurred from this supply tubing using 1/4" barbed fittings or 1/2" insert fittings, respectively.
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • Drip Irrigation Dripper Line

    1/4" Dripper Line with 12" spacing of built-in emitters in a 100' roll. May be used to customize the Irri-Gator Landscape-400 Kit. This dripper line may be used in the following applications:  Dense Plantings, Large Pots, Shrubs and Trees, and Gardens.
  • Distribution Tubing for Drip Irrigation Kits

    1/4" Distribution Tubing (no orifices) is most often branched off 1/2" dripper line or 1/2" supply tubing to individual plants with a drip emitter at the end. This tubing with no orifices may also be used as the mainline in smaller projects such as hanging baskets or small flower pot projects on decks and patios.
Go to Top