-
2 Inch Plastic Filter with Flush Valve - Economy
- Filtering Element - 155 mesh stainless steel screen
- Constructed from chemical resistant polypropylene reinforced with fiber glass
- Pre-molded pressure taps
- Threaded cover closure - easy to use / no tools required
- Includes flush valve
-
3/4″ Venturi Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4″ MHT x 3/4″ FHT to enable easy connection to a 3/4″ garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer -
Signature 1973 Whiz Head Rotary Sprinkler is ideal for riser installations in planting areas. It has a 1⁄2″ (1,27 cm) female threaded inlet. These sprinklers are made of high-impact corrosion-resistant plastic. Stainless steel bearing and large orifice nozzle. Made in the USA. -
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Brass irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Brass sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Brass sprinklers have been popular for irrigation systems due to several advantages they offer:- Durability: Brass is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that brass sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Brass is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Brass has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes brass sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Brass sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Bronze irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Bronze sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Bronze sprinklers have been popular for irrigation systems due to several advantages they offer:- Durability: Bronze is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that bronze sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Bronze is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Bronze has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes bronze sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Bronze sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Are you looking for a mesh filter to prevent debris from passing into your 3/4″ water hose line?
The Irritec Mesh Screen Filter is an excellent choice. Irritec outfits these 3/4-Inch Hose Thread T-Filters with a 150-mesh stainless-steel screen. One side of the filter has a female hose swivel and the other has a male hose thread. Irritec T-Filters are excellent for connecting tubing to pumps, filters, or other irrigation projects. These filters fit onto any hose bib or garden hose end. Use them wherever your system requires a 90-degree turn in the head assembly components. Unfiltered water enters the T from the female side, passes through the internal filter, and exits through the exit point on the side of the filter. Irritec designs all its irrigation supplies with quality and versatility in mind. These handy T-filters make it easier than ever to customize your irrigation setup to fit your unique needs! -
This is a telescoping Gutter Cleaner that expands up to 5 feet. Spray away leaves and dirt easily. Easy On/Off Switch Comfortable Grip Handle Adjustable hook for easy cleaning and storage. Aluminum tubes and fittings. -
This hand-held watering nozzle's design allows adjustment to the exact pattern of your lawn; ensuring the landscape is precisely watered with minimal overspray waste. 8 Spray patterns:- Shower
- Mist
- Soaker
- Angle
- Center
- Flat
- Cone
- Jet
-
The Irrigator Hand Nozzle with 8 Spray Patterns with comfortable rubber grip- Shower
- Flat
- Jet
- Mist
- Cone
- Soaker
- Center
- Angle
-
Water your garden with the touch of a button. Adjustable water flow rate. Comes in 4 colors - Blue, red, black and green. If you have a preference, add a note to your order and we will do our best to accommodate you. -
This compost is specially formulated to be an all natural, 100% organic fertilizer. LDK & Sons, LLC keeps your family in mind by keeping their products sustainable and safe to use without any worries! This can be used in gardens or containers. Directions for use: Gardens: Spread a uniform layer up to 2 inches on top of the soil, then mix in for best results. Containers: Mix 1 part compost with 2 parts of your favorite potting soil mix. -
Drip Irrigation Parts and Supplies
Perma-Loc x 250 Barb / Valve for 5/8" ID Tubing, aka In-Line Barbed Valve for 5/8" ID tubing, is used to control water flow. A valve can be easily installed into the rigid poly mainline to control the water flow of an individual row. This barbed valve is the 250 Series. A punch tool is required for installation. Consists of commercial grade, UV resistant plastic. The perfect accessory for our Gator 2000 Drip Irrigation Garden Kit!! -
Drip Irrigation Barb Plugs
Barb Plugs - Dual End A barb plug is used to plug holes from .075" to .225" in 1/2" supply tubing as well as capping off the end of 1/4" distribution tubing or 1/4" dripper line. Pack of 100 Barb Plugs. -
Gilmour Metal Y Connector w/ Shut Off Valves is a great way to control water flow for two hoses. Longer legs prevents hose kinks at faucet. Chrome-plated zinc construction. -
U shaped wire hold downs are great for securing poly tubing, dripper line or drip tubing in place. Simple to use and work well in heavy soils. 6" long. 100 Pack. -
U shaped wire hold downs are great for securing poly tubing, dripper line or drip tubing in place. Simple to use and work well in heavy soils. 6" long. 10 Pack. -
Punch-N-Cut Tool not only cuts rigid poly tubing, but also makes punching holes and inserting 1/4" barbed fittings & emitters almost effortless. All-In-One! It is a favorite among landscapers and commercial growers. This lightweight all-in-one tool is a great alternative to those frustrating days of keeping track of multiple tools! Punch N' Cut Tool has three major uses:- Cutting Tool - Cuts up to .94" mainline tubing with ease. Also cuts up to 1" PVC Schedule 40 with a little more effort required.
- PunchTool - Punches holes in 1/2" or larger mainline tubing for 1/4" fittings or emitters to be inserted.
- Insert Tool - Holds a barbed fitting and certain emitters to make installation easier. Less work for your fingers.
-
Drip Irrigation Fitting
1/2" Insert Coupler (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to join two together pieces of 1/2" Supply Tubing or 1/2" Dripper Line. Due to the style and size of the tubing as, a clamp is not typically required. These fittings and tubing are for low pressure drip systems. -
Drip Irrigation Barb Poly Fitting
1/2" Insert Elbow (.620" OD), which is a 1/2" barb x 1/2" barb poly fitting, allows you to make a 90 degree turn while joining together two pieces of 1/2" Supply Tubing or 1/2" Dripper Line. Due to the style and size of the tubing as, a clamp is not typically required. Used with Drip Irrigation Landscape Kit. -
Drip Irrigation Barb Poly Fitting
1/2" Insert Tee (.620" OD), which is a 1/2" barb x 1/2" barb x 1/2" barb poly fitting, allows you to branch off an additional 1/2″ line from the mainline or for an individual row. Due to the style and size of the tubing as, a clamp is not typically required. These fittings and tubing are for low pressure drip systems. -
Drip Irrigation Emitter (100 Pack)
The .5 GPH Emitter (Pressure Compensating) delivers a consistent output of water, even with changes in pressure due to long runs of drip tubing or elevation changes. These emitters are self-flushing and less likely to clog than non-pressure compensating drippers. A removable top makes cleaning them simple. -
Drip Irrigation Adapter
1/2" Insert x 3/4" MPT (Male Pipe Thread) Adapter is used to couple a 1/2" hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1/2" opening and a 3/4" opening. -
Drip Irrigation Parts and Supplies
In-Line valve for 5/8" ID tubing used to control water flow of individual lines. A valve can be easily installed directly into an individual row or into the mainline to control the water flow of more than one row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. The perfect accessory for our drip irrigation garden kits!! -
Drip Irrigation Parts and Supplies
Elbow fitting to be used with any Irri-Gator Drip Tubing or Distribution Tubing. Elbows allow you to make a sharp turn which the tubing itself is not capable of making. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Gator 100/250/1000 Installation Instructions -
Drip Irrigation Parts and Supplies
1" Insert x 3/4" MPT Adapter is used to couple a 1" hose to a 3/4" FPT (female pipe thread) fitting. A 1" clamp is recommended at the hose side.
